work handling blastroom

A lot of time can be needlessly wasted by using inappropriate or no work handling equipment to process the workpiece through the blastroom. Selection of the appropriate method depends on the workpiece and the blasting requirements.

In order to assist in processing the workpiece through the blastroom We supply a variety of work handling methods including, trolleys, monorails, turntables etc.

Our most popular system is a winch driven trolley. All moving parts are below ground level so tripping hazards are avoided. This sytem is inherently safe as the operator is operates the trolley using a hand held remote pendant. Any obstruction and the trolley can be instantly stopped.

For light work loads one of our manual push trolleys will often suffice for transporting work pieces. If the load is heavy then a powered trolley is required. We have fitted trolleys that will move work pieces up to 50 tonnes in weight.

 



back next

 

 


graphics link

trugrit-iconDownload our latest brochure on the TruGrit blastroom here.


Want to reduce your blasting costs? Get in touch and we will work with you for the best blastroom for your application.

contact-redtel: +65 6505 9098
fax: +65 6245 8785
mobile: +65 9850 0121

sales@blastechnik.com


 

location-redBlastechnik Pte Ltd
10 Admiralty Street #02-69
North Link Building, Singapore 757695






©Blastechnik Pte Ltd 2013
All rights Reserved