Blastechnik Industrial Spray Painting Booths are build specifically for the application of industrial spray painting and are designed and constructed either from folded bolt together steel panels or, if fire safety is a major concern, from 2 hour fire resistant Rockwool filled sandwich panels, tested to British Standards.

Operator safety and risk of fire are important criterior when designing spray painting booths. Blastechnik Industrial Spray Painting Booths are designed to comply with regulations such as NFPA33 and AS/NZ4114 to ensure all safety requirements are met and property and personnel damage or injury is kept to a minimum. Different countries have different safety requirements, our booths always follow the strictest regulations regardless of what is actually required.

Additional safety features built into our booths include: 

  • Fan assemblies are fitted with non sparking aluminium impellor and externally mounted electric motor prevent explosion hazard from sparking.
  • Exhaust fan inlet silencer reduces operators exposure to fan noise.
  • Progressive woven fibreglass outlet filters efficiently trap paint overspray and prevent environmental pollution from exhaust air stream.
  • Electrical controls provide pre and post painting air change purge to ensure no dangerous levels of residual gas and fumes remain in the painting booth.
  • Digital or analogue differential pressure gauges, with auto shut down if required, provide visual feed back of condition of filters and amount of blockage.

blastechnik blastroom brochure-icon64

back next

graphics link

trugrit-iconDownload our latest brochure on the TruGrit blastroom here.

Want to reduce your blasting costs? Get in touch and we will work with you for the best blastroom for your application.

contact-redtel: +65 6505 9098
fax: +65 6245 8785
mobile: +65 9850 0121


location-redBlastechnik Pte Ltd
10 Admiralty Street #02-69
North Link Building, Singapore 757695

©Blastechnik Pte Ltd 2013
All rights Reserved